2.Screw self-locking 8, 10, or 12" pipe adapter provided to bottom of odor control body and secure.
3. Depress quick release thumblock to remove or reposition pipe adapter.
4. Unit is designed to be installed on upright vent stack pipes only, with pipe adapter end facing down to and level with the ground. After securing pipe adapter, place entire unit on top of vent stack pipe and slide into place. Secure with thumbsrews provided if needed. Unit is in service, no instruction is needed.
To access odor control sock remove unit from vent stack locate end screens and remove screws. Lift end screens, discard used sock, and place empty new sock sealed end inside unit flow tube. Add media slowly to open end of sock until completely full, then secure open end with velcro strap. Draw fill sock with media into the flow tube.
Re-install end screens and secure with screen screws.
Return unit to service.
D-U-N-S 00-991-7399
Springfield, IL. 62702
tel: 888-261-4726
fax: 866-422-0018